Selection before
the schematic
is frozen.

01 / EQUIPMENT PROJECTS

Six projects. Connected equipment and component modules.

Logistics, outdoor and single-axis equipment are our current enquiry scope. Agriculture and construction reuse that layer as application directions.

Enquiry scope

Logistics

Compact transport and mobile electrical groups.

Explore the project ↗

Enquiry scope

Outdoor automation

Traction, tool branches and exposed connections.

Explore the project ↗

Enquiry scope

Single axis

One axis, limits, feedback and supply.

Explore the project ↗

Vehicle intelligence

Vehicle controls, connected networks, diagnostics and fleet services.

Explore this project ↗

Application direction

Agriculture

Inspection, weeding, pump/valve power and field carts.

Explore the project ↗

Application direction

Construction

Inspection platforms and positioning under site exposure.

Explore the project ↗

02 / COMPONENT LAYER

Component families and interface requirements.

Motion · 6Power · 5Interconnect · 4

Single-axis stepper & drive

Holding load; running torque at speed; supply and phase current; step/direction or supported command interface.

Requirements & interfaces ↗

Brushless motor & drive

Wheel or cutter torque; speed range; full supply envelope; continuous and peak duty.

Requirements & interfaces ↗

Planetary gearhead

Flange, pilot and shaft; reduction ratio; continuous and peak output torque; radial and axial load.

Requirements & interfaces ↗

Holding brake

Coil voltage and release current; holding torque; engagement/release time; power-off or power-on action.

Requirements & interfaces ↗

Incremental encoder

Counts per revolution and counting convention; supply; electrical output and frequency; shaft or hub mounting.

Requirements & interfaces ↗

Limit & home devices

Travel and reference locations; supply/contact type; receiving input; installation and operating exposure.

Requirements & interfaces ↗

03 / CONFIGURATIONS

Open the machine. Select a module.

An equipment arrangement connects the complete machine to its component functions.

Mobile platform

Wheel motion, pack input and auxiliary rails.

Open the module map ↗

Outdoor automation

Separate traction and working loads.

Open the module map ↗

Single-axis machine

Motor/drive, transmission, limits and supply.

Open the module map ↗

APPLICATION MAP

Six equipment and vehicle directions.

All configurations ↗ · Care transfer & cabinetry directions ↗