APPLICATION DIRECTION
Agriculture & field equipment
Mobile-platform electrical interfaces adapted for slope, dust, washing and work attachments.
Equipment tasks
Field inspection
Instrument rails separated from traction.
Open equipment & modules ↗
Mechanical weeding / mowing
Traction and tool actuation as separate loads; mower cutting loads use the outdoor configuration.
Open equipment & modules ↗
Pump & valve platform
Pump supply, valve coils and connectors only.
Open equipment & modules ↗
Field transport
State powered or towed arrangement before specifying drive components.
Open equipment & modules ↗Four inputs to start with
Slope, terrain and loaded travel
Provide the operating range, receiving interface or drawing that defines this requirement.
Pack range and attachment loads
Provide the operating range, receiving interface or drawing that defines this requirement.
Pump, valve or tool interface
Provide the operating range, receiving interface or drawing that defines this requirement.
Dust, washing and service mating
Provide the operating range, receiving interface or drawing that defines this requirement.
Continue into the component blocks
Motion
Review component families, operating limits and receiving interfaces.
Open the blocks ↗Power
Review component families, operating limits and receiving interfaces.
Open the blocks ↗Interconnect
Review component families, operating limits and receiving interfaces.
Open the blocks ↗AC-DC applies only to plugged-in equipment. Battery/BMS, charging, navigation and connected-service requirements can be reviewed through the vehicle and outdoor equipment project modules. Protective devices and complete-machine verification are specified for the selected installation.
From configuration to enquiry
Open a task above to review its separate electrical modules. Supply scope and compatibility are confirmed against the actual specification; complete equipment and component supply scope are confirmed for the selected project.
Send component requirements ↗CONTINUE EXPLORING
Other equipment projects
Warehouse & logistics
Transport, lifting, picking and sorting.
Explore this project ↗
Outdoor automation
Mowing, sweeping and utility transport.
Explore this project ↗
Construction & building
Inspection platforms and positioning axes.
Explore this project ↗
Industrial / single axis
Linear positioning, conveyors and actuator axes.
Explore this project ↗Future application directions
FUNCTIONAL BREAKDOWN
Module groups and constituent blocks
Transport & traction
Wheel drive moves the platform. Separate wheel-drive demand from any payload or tool load.
Inspect module composition ↗Handling & actuator interfaces
Lifting, picking and positioning have separate actuator interfaces. An articulated arm requires the arm supplier’s axis architecture; this is not a complete robot-arm offering.
Inspect module composition ↗Power distribution & conversion
Pack input, drive branches and auxiliary rails are separate selection blocks. AC-DC is relevant only when the machine is plugged in.
Inspect module composition ↗Position & state feedback
Encoder feedback, a home reference and a travel limit serve different functions. Match each device to the receiving controller.
Inspect module composition ↗Electrical load monitoring
Current measurement observes a pack, branch or phase. The receiving controller implements the defined monitoring behavior; a measurement device alone is not a safety function.
Inspect module composition ↗Connections & moving cable
Power, signal and moving-cable installation must be defined as complete mating and routing arrangements.
Inspect module composition ↗Stop, enable & limit interfaces
Separate machine stopping and restart requirements from ordinary position inputs. The equipment risk assessment defines the safety architecture.
Inspect module composition ↗Vision, navigation and sensing: project integration modules ↗
PROJECT / MODULE / COMPONENT
New-energy UTV / farm and ranch transport
Vehicle control & by-wire
Driver intent, torque requests, energy coordination and defined actuator interfaces.
Explore requirements & interfaces ↗Battery, BMS & charging
Pack energy, protection, state estimation and a charger matched to the site.
Explore requirements & interfaces ↗Thermal & auxiliary management
Battery/motor thermal circuits, pump/fan duty and accessory power.
Explore requirements & interfaces ↗Body electronics & operator interface
Body loads, operator display, warnings and configured camera views.
Explore requirements & interfaces ↗Telematics & vehicle networks
CAN acquisition, gateway routing, location and cellular data transport.
Explore requirements & interfaces ↗Diagnostics, calibration & OTA
Service access, fault history, engineering calibration and controlled updates.
Explore requirements & interfaces ↗Navigation & autonomous-machine integration
Localization, environment sensing, route planning and vehicle control.
Explore requirements & interfaces ↗Connected fleet & lifecycle services
Operations visibility, maintenance, engineering support and cloud deployment.
Explore requirements & interfaces ↗